![]() Neighborhood APs and clients external to your network.Poorly designed wireless network or misconfiguration.To help you to identify sources of interference, you can perform a spectrum analysis during the pre-installation and post-deployment phases. To optimize the performance of your wireless network you must be able to identify, locate and avoid sources of interference. Interference caused by Wi-Fi or non-Wi-Fi devices can greatly reduce performance of wireless networks. If you have a -41 dBm signal strength, and a -96 dBm noise level, this results in an excellent signal-to-noise ratio of +55 dB.If you have a -41 dBm signal strength, and a -50 dBm noise level, this results in a poor signal-to-noise ratio of +9 dB.Values lower than +25 dB result in poor performance and speeds. In general, your signal-to-noise ratio should be +25 dB or higher.This value is represented as a dB value.The signal-to-noise ratio (SNR) is the ratio between the signal strength and the noise level. For example, -96 dBm is a lower noise level than -20 dBm. Negative values indicate less background noise.The closer the value to 0, the greater the noise level.This is the power ratio in decibels (dB) of the measured power referenced to one milliwatt. Noise level is measured in dBm format (0 to -100).If the noise level is too high, it can degrade the strength and performance of your wireless signal. ![]() The noise level indicates the amount of background noise in your environment. For example, -41 dBm is a stronger signal than -61 dBm. The closer the value is to 0, the stronger the signal.Signal strength is represented in dBm format (0 to -100). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |